Fix Your Stuff Community Store

Beats Pill 1.0 öffnen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
German
Next step

Translating step 1

Step 1
Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 1 of 3 Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 2 of 3 Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 3 of 3
Removing the Case Screws

  • Using the spudger, create space between the speaker covers and then remove.

  • On the underside of the device, remove the rubber stand with the BeatsPill logo on it.

  • Using an ESD-safe Phillips #0 screwdriver, remove the four screws that were underneath the rubber stand.

Gehäuseschrauben entfernen

Setze einen Spudger unter die Lautsprecherabdeckungen, erzeuge einen kleinen Spalt und entferne sie dann

Entferne an der Unterseite den Gummifuß mit dem Beats Pill Logo.

Unter dem Gummifuß befinden sich vier Kreuzschlitzschrauben #0. Drehe sie heraus.

[title] Removing the Case Screws
-[* red] Using the spudger, create space between the speaker covers and then remove.
-[* orange] On the underside of the device, remove the rubber stand with the BeatsPill logo on it.
-[* yellow] Using a ESD-safe Philips #0 Screwdriver, remove the four screws that were underneath the rubber stand.
+[* black] Using the spudger, create space between the speaker covers and then remove.
+[* black] On the underside of the device, remove the rubber stand with the BeatsPill logo on it.
+[* red] Using an ESD-safe Phillips #0 screwdriver, remove the four screws that were underneath the rubber stand.

Your contributions are licensed under the open source Creative Commons license.