Fix Your Stuff Community Store

Desmontando el Beats Pill 1.0

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 1 of 3 Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 2 of 3 Disassembling Beats Pill 1.0, Removing the Case Screws: step 0, image 3 of 3
Removing the Case Screws

  • Using the spudger, create space between the speaker covers and then remove.

  • On the underside of the device, remove the rubber stand with the BeatsPill logo on it.

  • Using an ESD-safe Phillips #0 screwdriver, remove the four screws that were underneath the rubber stand.

Quitando los tornillos de la carcasa

Usando el spudger, crea espacio entre las cubiertas de los altavoces y luego retírelo.

En la parte inferior del dispositivo, quita el soporte de goma con el logotipo de BeatsPill.

Usando un destornillador Philips #0 que sea seguro para ESD. Quita los cuatro tornillos que estaban debajo del soporte de goma.

Your contributions are licensed under the open source Creative Commons license.