Fix Your Stuff Community Store

Smontaggio Beats Pill 1.0

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 2

Step 2
Disassembling Beats Pill 1.0, Removing Center Cover: step 0, image 1 of 3 Disassembling Beats Pill 1.0, Removing Center Cover: step 0, image 2 of 3 Disassembling Beats Pill 1.0, Removing Center Cover: step 0, image 3 of 3
Removing Center Cover

  • Remove the two screws with a Phillips #0 screwdriver.

  • Slowly remove the center band and two clip rings until the adhesive separates. Sit to the side the clip rings and the center band

Rimuovi la copertura centrale

Svita le due viti con un cacciavite a croce Phillips #0.

Rimuovi lentamente la banda centrale e i due ganci ad anello fino a separare l'adesivo.

[title] Removing Center Cover
[* red] Remove the two screws with a Phillips #0 screwdriver.
-[* black] Slowly remove the center band and two clip rings until the adhesive separates.
+[* yellow] Slowly remove the center band and two clip rings until the adhesive separates. Sit to the side the clip rings and the center band

Your contributions are licensed under the open source Creative Commons license.