Fix Your Stuff Community Store

更换Shark Navigator的滚轮刷盒

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 2

Step 2
Shark Navigator Roller Brush Compartment Replacement: step 0, image 1 of 2 Shark Navigator Roller Brush Compartment Replacement: step 0, image 2 of 2

  • Remove the 10 Phillips screws located on the bottom of the roller brush compartment. (Two of these screws are located under the wheels from the previous step.)

  • The screws have varying lengths, so keep track of where each one goes for reassembly.

拧掉滚轮盒底部的10颗飞利浦螺丝。（有两颗在上一步骤移出的小轮子下面）

提示：这些螺丝有不同的长度，最好标示 好各螺丝的位置方便于重新装配。

Your contributions are licensed under the open source Creative Commons license.