Fix Your Stuff Community Store

Sostituizione schermo MacBook Air 13" di inizio 2015

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 2

Step 2
MacBook Air 13" Early 2015 Display Assembly Replacement: step 0, image 1 of 2 MacBook Air 13" Early 2015 Display Assembly Replacement: step 0, image 2 of 2

  • Disconnect the camera cable connector with the tip of a spudger.

  • Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.

  • Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.

  • Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

Usa la punta di uno spudger per scollegare il connettore del cavo della camera.

Fai leva prima su un lato del connettore epoi sull'altro alternativamente per muoverlo man mano verso l'alto e scollegarlo.

Tira il cavo della camera in modo parallelo alla scheda madre verso il bordo frontale del MacBook Air per scollegarlo.

Non tirare verso l'alto questo cavo mentre lo scolleghi: potresti strappare la sua presa dalla scheda madre.

Your contributions are licensed under the open source Creative Commons license.