Skip to main content

MacBook Air 13" Ende 2010 Gehäuseunterteil austauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
German

Translating step 1

Step 1
MacBook Air 13" Late 2010 Lower Case Replacement: step 0, image 1 of 1
  • Before proceeding, power off the device, close the lid and lay it on a soft surface top-side down.

  • Remove the following ten screws:

  • Two 9 mm 5-point Pentalobe screws

  • Eight 2.6 mm 5-point Pentalobe screws

  • The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found here.

Bevor du weitermachst, schalte das Gerät aus, schließe den Deckel und lege den Computer mit der Unterseite nach oben auf eine weiche ebene Oberfläche.

Drehe folgende zehn Schrauben heraus:

Zwei 9 mm 5-Point Pentalobe Schrauben

Acht 2,6 mm 5-Point Pentalobe Schrauben

Den speziellen Schraubendreher, um die zehn 5-Point Pentalobe Schrauben herauszudrehen, findest du hier.

Your contributions are licensed under the open source Creative Commons license.