/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Reemplazo de la tapa inferior MacBook Pro 13" Unibody principios de 2011

Notice: You are editing a prerequisite guide. Any changes you make will affect all 65 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: step 0, image 1 of 1

  • Remove the following ten screws:

  • Three 14.4 mm Phillips #00 screws

  • Three 3.5 mm Phillips #00 screws

  • Four 3.5 mm shouldered Phillips #00 screws

  • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

Extrae los siguientes diez tornillos:

Tres tornillos Phillips #00 de 14.4 mm

Tres tornillos Phillips #00 de 3.5 mm

Cuatro tornillos de resalto Phillips #00 de 3.5 mm

Al reemplazar los tornillos pequeños, alinéalos en perpendicular a la suave curvatura de la carcasa (no van perfectamente en vertical hacia abajo).

Your contributions are licensed under the open source Creative Commons license.