Fix Your Stuff Community Store

Remplacement du boîtier supérieur du MacBook Core 2 Duo

Notice: You are editing a prerequisite guide. Any changes you make will affect all 38 guides that include this step.

Back to Guide
English
French
Next step

Translating step 1

Step 1
MacBook Core 2 Duo Upper Case Replacement: step 0, image 1 of 1

  • Remove the following 3 screws:

  • One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)

  • Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

  • If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

  • The shorter of the three screws goes in the middle of the lower case.

Retirez les 3 vis suivantes :

Une vis Phillips n°00 11 mm au milieu du boîtier (tête : diamètre 5 mm x épaisseur 0,75 mm).

Deux vis Phillips n°00 14,5 mm (tête : diamètre 5 mm x épaisseur 0,75 mm).

Si les vis adhèrent au boîtier, vous pouvez utiliser un tournevis aimanté pour les sortir.

La plus courte de ces vis est celle du milieu.

[* black] Remove the following 3 screws:
- [* red] One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
+ [* red] One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
-[* icon_reminder] The shorter of the three screws goes in the middle.
+[* icon_reminder] The shorter of the three screws goes in the middle of the lower case.

Your contributions are licensed under the open source Creative Commons license.