/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Sostituzione Case Superiore nel MacBook Core 2 Duo

Notice: You are editing a prerequisite guide. Any changes you make will affect all 38 guides that include this step.

Back to Guide
English
Italian
Next step

Translating step 1

Step 1
MacBook Core 2 Duo Upper Case Replacement: step 0, image 1 of 1

  • Remove the following 3 screws:

  • One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)

  • Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

  • If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

  • The shorter of the three screws goes in the middle of the lower case.

Rimuovere le 3 viti seguenti:

Una vite con testa a croce n. 00 da 11 mm nella parte centrale del case. (Testa: 5 mm di diametro x 0,75 mm di spessore)

Due viti con testa a croce n. 00 da 14,5 mm (testa: 5 mm di diametro x 0,75 mm di spessore)

Se le viti restano incastrate nel case, è possibile utilizzare un cacciavite magnetico per recuperarle.

La vite più corta delle tre va al centro.

[* black] Remove the following 3 screws:
- [* red] One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
+ [* red] One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
-[* icon_reminder] The shorter of the three screws goes in the middle.
+[* icon_reminder] The shorter of the three screws goes in the middle of the lower case.

Your contributions are licensed under the open source Creative Commons license.