Fix Your Stuff Community Store

Installazione Unità Ottica nel MacBook Core 2 Duo

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 4

Step 4
MacBook Core 2 Duo Optical Drive Replacement: step 0, image 1 of 1

  • Disconnect the newly revealed display data cable's plug from the logic board by pulling it upward using its black pull-tab.

  • If there is no pull-tab on top of the plug, it may be helpful to use a spudger to disconnect this plug.

Scollegare il cavo dati del display appena esposto. Se non sono presenti linguette da tirare nella parte superiore del connettore, potrebbe essere utile adoperare un inseritore per scollegare il connettore.

-[* black] Disconnect the newly revealed display data cable. If there is no pull-tab on the top of the connector, it may be helpful to use a spudger to disconnect this connector.
+[* black] Disconnect the newly revealed display data cable's plug from the logic board by pulling it upward using its black pull-tab.
+[* icon_note] If there is no pull-tab on top of the plug, it may be helpful to use a spudger to disconnect this plug.

Your contributions are licensed under the open source Creative Commons license.