Fix Your Stuff Community Store

Remplacement du lecteur optique du MacBook Core 2 Duo

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 6

Step 6
MacBook Core 2 Duo Optical Drive Replacement: step 0, image 1 of 1

  • Peel up the foil tape between the fan and the optical drive. Lift the foil tape from the fan side, leaving it attached to the optical drive.

  • During reassembly, be sure to route the cables beneath the tape before reattaching it.

  • If the adhesive on this foil tape no longer sticks, you can hold it in place using a regular piece of tape, but don't block the fan intake.

Décollez le ruban adhésif alu entre le ventilateur et le lecteur optique. Enlevez le ruban du côté du ventilateur et laissez-le sur le lecteur optique.

Lors du réassemblage, faites attention de bien positionner les câbles sous le ruban adhésif avant de les recoller.

[* black] Peel up the foil tape between the fan and the optical drive. Lift the foil tape from the fan side, leaving it attached to the optical drive.
[* black] During reassembly, be sure to route the cables beneath the tape before reattaching it.
+[* icon_note] If the adhesive on this foil tape no longer sticks, you can hold it in place using a regular piece of tape, but don't block the fan intake.

Your contributions are licensed under the open source Creative Commons license.