Fix Your Stuff Community Store

Installazione Unità Ottica nel MacBook Core 2 Duo

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 8

Step 8
MacBook Core 2 Duo Optical Drive Replacement: step 0, image 1 of 1

  • Remove the 2 mm Phillips #00 screw securing the rear corner of the optical drive.

  • When reinstalling this screw, make sure none of the cables nearby get caught under the screw's head.

  • The silver-jacketed Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to remove the screw holding the ground shield lugs for the two nearby cables before you can move the Bluetooth cable aside sufficiently. This screw is 7mm in earlier models, and may be 4.2mm in Santa Rosa/Penryn and 2009 models.

Rimuovere la vite con testa a croce da 2 mm che fissa l'unità ottica.

Il cavo Bluetooth potrebbe coprire la vite, pertanto spostarlo di lato con attenzione prima di iniziare a svitare.

-[* red] Remove the 2 mm Phillips #00 screw securing the optical drive.
-[* orange] The Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to unscrew the cable clip to free the cable enough.
+[* red] Remove the 2 mm Phillips #00 screw securing the rear corner of the optical drive.
+ [* icon_note] When reinstalling this screw, make sure none of the cables nearby get caught under the screw's head.
+[* orange] The silver-jacketed Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to remove the screw holding the ground shield lugs for the two nearby cables before you can move the Bluetooth cable aside sufficiently. This screw is 7mm in earlier models, and may be 4.2mm in Santa Rosa/Penryn and 2009 models.

Your contributions are licensed under the open source Creative Commons license.