Fix Your Stuff Community Store

Remplacement du panneau frontal complet de l'iPad 2 Wi-Fi EMC 2415

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

Back to Guide
English
French
Next step

Translating step 1

Step 1
iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 1 of 2 iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 2 of 2

  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • The retaining flaps are highlighted in red in the second picture.

Avec le bord d'un outil en plastique, ouvrez soigneusement le clapet de retenue des deux prises ZIF de la nappe du numériseur.

Veillez à faire levier sur les clapets de retenue et non sur les prises mêmes.

Les clapets de retenue sont entourés en rouge sur la seconde photo.

Your contributions are licensed under the open source Creative Commons license.