Fix Your Stuff Community Store

PowerBook G4 Aluminum 12" 1-1.5 GHz Upper Case Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 5

Step 5
PowerBook G4 Aluminum 12" 1-1.5 GHz Upper Case Replacement: step 0, image 1 of 1

  • Turn the computer over and open it up.

  • Remove the following 14 screws:

  • Six 2.5 mm Phillips on either side of the keyboard area.

  • Five 4.5 mm Phillips on the left half of the keyboard area.

  • One 7 mm hex in the upper left corner of the upper case (a T6 Torx driver will do the job nicely).

  • One 15 mm Phillips in the upper middle of the keyboard area.

  • One 16.5 mm hex in the upper right of the upper case (again, a T6 Torx driver will work well).

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.