Fix Your Stuff Community Store

PowerBook G4 Aluminum 12" 1-1.5 GHz Heat Sink Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 18 guides that include this step.

Back to Guide
English
Japanese
Previous step Next step

Translating step 2

Step 2
PowerBook G4 Aluminum 12" 1-1.5 GHz Heat Sink Replacement: step 0, image 1 of 1

  • Remove the following eight screws:

  • One 4.5 mm Phillips near the modem.

  • Three 6 mm Phillips near the display.

  • Two large 7.5 mm Phillips with attached springs.

  • Two 13 mm Phillips, one on the lower left side of the heat sink and one between the fan and the optical drive.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.