Fix Your Stuff Community Store

Reemplazo de Batería de iPod Classic

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 20

Step 20
iPod Classic Battery Replacement: step 0, image 1 of 1

  • Lift the hard drive up with one hand so you can access the headphone jack ribbon beneath.

  • Use a spudger to flip up the plastic tab holding the headphone jack ribbon in place. The tab will rotate up 90 degrees, releasing the ribbon cable.

  • Slide the orange headphone jack ribbon out of its connector.

  • The rear panel is now free from the iPod.

Levanta el disco duro con una mano para poder acceder al conector de los auriculares, que se encuentra debajo.

Usa el Spudger para levantar la placa de plástico que mantiene el cable del conector de los auriculares en su lugar. La placa girará 90 grados, soltando el cable plano.

Desliza y quita el cable plano naranja del conector de los auriculares.

El panel trasero ahora está completamente separado del iPod.

Your contributions are licensed under the open source Creative Commons license.