Fix Your Stuff Community Store

iPad 2 GSM Logic Board austauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 7

Step 7
iPad 2 GSM Logic Board Replacement: step 0, image 1 of 3 iPad 2 GSM Logic Board Replacement: step 0, image 2 of 3 iPad 2 GSM Logic Board Replacement: step 0, image 3 of 3

  • Use the edge of a plastic opening tool to flip up the retainer securing the upper component board cable connector to its socket on the logic board.

  • Pull the connector away from its socket on the logic board.

  • Do not lift the cable upward as you disconnect it.

Kippe den Sicherungsbügel, der den Stecker des Steuerplatinenkabels an seinem Anschluss auf dem Logic Board sichert, mit der Kante eines Öffnungswerkzeugs hoch.

Ziehe den Stecker aus seinem Anschluss auf dem Logic Board heraus.

Hebe das Kabel beim Lösen nicht nach oben

Your contributions are licensed under the open source Creative Commons license.