Fix Your Stuff Community Store

MacBook Air 13" Mitte 2011 Displayeinheit austauschen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 3

Step 3
MacBook Air 13" Mid 2011 Display Assembly Replacement: step 0, image 1 of 1

  • Open the display until it is perpendicular to the upper case and place it on a table as shown.

  • While holding the MacBook Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.

Öffne das Display, bis es senkrecht zum oberen Gehäuseteil steht und platziere es, wie auf dem Bild zu sehen, auf einen Tisch.

Während du das Air festhältst, entferne die übriggebliebene 4,9 mm T8 Torx Schraube von der unteren Displayklammer.

[* black] Open the display until it is perpendicular to the upper case and place it on a table as shown.
-[* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.
+[* red] While holding the MacBook Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.

Your contributions are licensed under the open source Creative Commons license.