Fix Your Stuff Community Store

Reemplazo del conjunto de pantalla del MacBook Air de 13" de mediados de 2011

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 3

Step 3
MacBook Air 13" Mid 2011 Display Assembly Replacement: step 0, image 1 of 1

  • Open the display until it is perpendicular to the upper case and place it on a table as shown.

  • While holding the MacBook Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.

Abre el display hasta que este perpendicular a la carcasa superior y colócalo en una mesa como se muestra.

Mientras sostienes el Air firmemente, retira el tornillo Torx T8 restante de 4.9 mm del bracket del display inferior.

[* black] Open the display until it is perpendicular to the upper case and place it on a table as shown.
-[* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.
+[* red] While holding the MacBook Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.

Your contributions are licensed under the open source Creative Commons license.