Skip to main content

MacBook Air 13インチ Mid 2011ロジックボードの交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Japanese

Translating step 4

Step 4
MacBook Air 13" Mid 2011 Logic Board Replacement: step 0, image 1 of 3 MacBook Air 13" Mid 2011 Logic Board Replacement: step 0, image 2 of 3 MacBook Air 13" Mid 2011 Logic Board Replacement: step 0, image 3 of 3
  • Gently push the tip of a spudger under the black plastic flap stuck to the display data cable lock to make the lock pop upward and away from the socket.

  • While holding the lock away from the socket, use the tip of a spudger and your fingers to gently remove the display data cable from its socket.

  • Do not pull upward on the display data cable as you disconnect it, as its socket may break off the logic board.

スパッジャーの先端を、ディスプレイデータケーブルのロックに付けられた黒いプラスチックのフラップ下に慎重に押し込んで、ロックを上方に持ち上げてソケットから外します。

ロックをソケットから離しながら、スパッジャーの先端と指を使って、ソケットからディスプレイデータケーブルをゆっくりと外します。

デイスプレイデーターケーブルを上向きに引っ張らないでください。ソケットがロジックボードから外れてしまう可能性があります。

Your contributions are licensed under the open source Creative Commons license.