/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In

Installation de la carte mère dans le Mac Mini mi-2011

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 4

Step 4
Mac mini Mid 2011 Logic Board Replacement: step 0, image 1 of 3 Mac mini Mid 2011 Logic Board Replacement: step 0, image 2 of 3 Mac mini Mid 2011 Logic Board Replacement: step 0, image 3 of 3

  • To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.

  • Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.

  • Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.

  • Cease prying when the I/O board is visibly separated from the outer case.

  • Remove the Mac mini Logic Board Removal tool.

Pour le retrait de la carte mère, les deux tiges cylindriques de l'outil de retrait de la carte mère du Mac Mini doivent être insérées dans les orifices repérés en rouge. Attention ! Si vous insérez des instruments dans des orifices de la carte mère autres que ceux repérés en rouge, vous risquez de détruire la carte mère.

Insérez les tiges de l'outil dans les deux orifices repérés en rouge. Assurez-vous qu'elles sont en contact avec le dessus du boîtier extérieur en dessous de la carte mère avant de continuer.

Avec précaution, tirez l'outil vers la carte d'E/S. L'ensemble carte mère et carte d'E/S doit glisser légèrement hors du boîtier extérieur.

Arrêtez le mouvement de levier lorsque la carte d'E/S est clairement séparée du boîtier extérieur.

Retirez l'outil de retrait de la carte mère du Mac Mini.

-[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
-[* red] Insert the [product|IF145-159|Mac Mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
+[* icon_caution] To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
+[* red] Insert the [product|IF145-159|Mac mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
[* icon_note] Cease prying when the I/O board is visibly separated from the outer case.
-[* black] Remove the Mac Mini Logic Board Removal tool.
+[* black] Remove the Mac mini Logic Board Removal tool.

Your contributions are licensed under the open source Creative Commons license.