Skip to main content

iMac Intel 21.5インチ Retina 4Kディスプレイアセンブリの交換

Notice: You are editing a prerequisite guide. Any changes you make will affect all 27 guides that include this step.

English
Japanese

Translating step 3

Step 3
iMac Intel 21.5" Retina 4K Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: step 0, image 3 of 3
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

フレームからディスプレイを持ち上げて、iMacから取り出します。

接着剤が残っている場合があるため、ディスプレイ上方からゆっくりと接着剤を剥がしながら持ち上げなければなりません。

ディスプレイを取扱う際は慎重に作業を進めてくださいー重量があり、大きく、ガラス製です。

接着剤が切断できたらディスプレイを固定するための接着剤は再利用できません。このガイド を使って、ディスプレイをリアエンクロージャに固定するための接着ストリップを交換してください。

Your contributions are licensed under the open source Creative Commons license.