Fix Your Stuff Community Store

Öffnungsprozedur

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 5

Step 5
Opening Procedure: step 0, image 1 of 3 Opening Procedure: step 0, image 2 of 3 Opening Procedure: step 0, image 3 of 3

  • Insert a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go.

  • Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.

Führe ein zweites Plektrum neben dem ersten ein und ziehe es vorsichtig nach unten, um die Klebeverbindung des Displays zu lösen.

Wenn du einen großen Widerstand spürst, halte an und erwärme das iPad nochmals mit dem iOpener. Wenn du zu viel Kraft aufwendest, kannst du das Display irreparabel beschädigen.

Your contributions are licensed under the open source Creative Commons license.