Fix Your Stuff Community Store

Panasonic DMC-FZ35 Main Board Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
French
Previous step Next step

Translating step 2

Step 2
Panasonic DMC-FZ35 Main Board Replacement, Releasing wire: step 0, image 1 of 3 Panasonic DMC-FZ35 Main Board Replacement, Releasing wire: step 0, image 2 of 3 Panasonic DMC-FZ35 Main Board Replacement, Releasing wire: step 0, image 3 of 3
Releasing wire

  • Release the socket. It would be best to use a method that does not require pulling on the wires.

  • One way to release the socket is by carefully inserting a thin wedge between the male and female sockets and carefully pry them apart.

  • If you are using a sharp object be careful around the wires. Any slip can cut the wires. To prevent any ESD damage please do not touch any part of your circuit board with your bare hands or tools. Use nitrile gloves or an esd device.

  • Remove 1 silver screw (0.4mm) next to joy stick.

  • Remove 1 silver blue tip coated (0.4mm) screw bottom left corner.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.