Fix Your Stuff Community Store

iPhone 7 Plus 홈/Touch ID 센서 교체

English
Korean

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

iPhone 7 Plus Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 8 여는 절차

iPhone 7 Plus 배터리 분리

iPhone 7 Plus 디스플레이 어셈블리 교체

Guide Information

= Done = Incomplete
    The iPhone 7 Plus home “button” is actually a solid-state sensor, which also includes Touch ID (fingerprint recognition) capability.
    '''Most replacement home buttons won’t work''', so check carefully before starting your repair. Your iPhone’s original home button is uniquely paired to the logic board at the factory—and without Apple’s proprietary calibration process, even a genuine replacement home button from another iPhone won’t work. To fix a broken home button, you should install a specially-made, [https://www.ifixit.com/Store/iPhone/iPhone-7-7-Plus-8-8-Plus-Replacement-Home-Button/product|IF332-079?o=1|universal-style home button]. Note that these replacements only work as a button; Touch ID will not function.
    If you are only replacing a broken screen, you can use this guide to carefully remove and transfer your working original home button to a new screen, preserving all functions, including Touch ID.
    During this procedure, to avoid accidentally straining or tearing the display cables, it's best to completely detach the display assembly before beginning repairs on the home/Touch ID sensor. But if you are comfortable doing so, you may skip the display assembly section of this guide and go straight to the home/Touch ID sensor section.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or search our [link|https://www.ifixit.com/Answers/Device/iPhone%207%20Plus|Answers forum] for help.

      Guide Steps

      Step 1

      홈/Touch ID 센서 위로 브래킷을 고정하는 Y000 나사 네 개를 풀어주세요:

      Step 2

      홈/Touch ID 센서를 고정하는 브래킷을 분리하세요.

      Step 3

      홈 버튼 케이블 커넥터 왼쪽 가장자리 밑을 들어 올려 소켓에서 분리하세요.

      Step 4

      밑에 있는 커넥터를 조심히 들어 올려 홈/Touch ID 케이블에서 빼세요.

      Step 5

      홈/Touch ID 센서 주변을 가열하면 정교한 케이블을 제자리에 고정하는 접착제를 부드럽게 만들어 안전하게 분리할 수 있습니다.

      Step 6

      여는 픽을 사용하여 홈/Touch ID 센서 케이블을 디스플레이 패널 후면에 고정하는 접착제를 조심히 분리하세요.

      Step 7

      디스플레이 전면을 통해서 홈/Touch ID 센서 어셈블리를 들어 올려 분리하세요.

      Your contributions are licensed under the open source Creative Commons license.