Fix Your Stuff Community Store

iPhone 4S Logic Board Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 7

Step 7
iPhone 4S Logic Board Replacement: step 0, image 1 of 1

  • Remove the following screws securing the logic board to the case:

  • One 2.5 mm Phillips screw near the vibrator motor

  • One 2.4 mm Phillips screw

  • One 3.6 mm standoff along the side of the logic board nearest the battery opening.

  • Use a standoff driver bit and driver handle to remove the single 3.6 mm standoff screw.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.