Fix Your Stuff Community Store

iPhone 4S 逻辑板更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 7

Step 7
iPhone 4S Logic Board Replacement: step 0, image 1 of 1

  • Remove the following screws securing the logic board to the case:

  • One 2.5 mm Phillips screw near the vibrator motor

  • One 2.4 mm Phillips screw

  • One 3.6 mm standoff along the side of the logic board nearest the battery opening.

  • Use a standoff driver bit and driver handle to remove the single 3.6 mm standoff screw.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

卸下下列将逻辑板与后壳固定的螺丝。

一个位于振动模块的2.5 mm Phillips 螺丝

一个 2.4 mm Phillips螺丝

一个3.6 mm螺丝，其位于逻辑板右侧最接近电池开口位置。

使用专用螺丝刀或者小型平头起子来卸下单个的3.6mm隔离柱。

在必要的时候，一把普通的小螺丝刀足以完成此操作。但应特别小心，保证它不会打滑或者损坏周围的部件。

Your contributions are licensed under the open source Creative Commons license.