Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.
Translating step 1
Step 1
-
Remove the screws securing the bottom case to the keyboard.
-
Remove the six 3.68 mm screws and the single 4.45 mm screw that had been concealed by the battery.
-
Use a pair of tweezers to remove the two rubber covers located at the upper left and right corners.
-
With the rubber covers gone, two 4.52 mm screws should now be visible. Remove these screws.
Your contributions are licensed under the open source Creative Commons license.