Fix Your Stuff Community Store

iMac G5 20" Model A1076 Rear Panel Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Back to Guide
English
Italian
Next step

Translating step 1

Step 1
iMac G5 20" Model A1076 Rear Panel Replacement: step 0, image 1 of 1

  • Lay the iMac display-side down on a flat surface (putting a cloth under the screen to protect it from bumps).

  • Loosen the three Phillips screws securing the rear panel to the iMac.

  • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.