Skip to main content

Reemplazo de AirPort/Cable de cámara de MacBook Pro 15" con Pantalla de Retina de Mediados de 2012

Notice: You are editing a prerequisite guide. Any changes you make will affect all 46 guides that include this step.

English
Spanish

Translating step 1

Step 1
MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: step 0, image 1 of 1
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Usa un spudger o pinzas para levantar los tres cables de antena AirPort directamente de sus enchufes en la placa AirPort.

Los puntos de conexión del cable son frágiles. Ten cuidado de solo levantar en el conector y no en el zócalo o cable.

Para reconectar, alinea el conector con cuidado en posición sobre el zócalo y presiónalo con la parte plana de tu spudger.

Your contributions are licensed under the open source Creative Commons license.