Skip to main content

MacBook Pro 15" Retina-scherm mid 2012 Vervanging van de AirPort-/Camerakabel

Notice: You are editing a prerequisite guide. Any changes you make will affect all 46 guides that include this step.

English
Dutch

Translating step 1

Step 1
MacBook Pro 15" Retina Display Mid 2012 AirPort/Camera Cable Replacement: step 0, image 1 of 1
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Gebruik een spudger of een pincet om de drie AirPort-antennekabels in een rechte beweging uit hun contacten op het AirPort-bord omhoog te duwen.

De punten van de kabelaansluitingen zijn erg fragiel. Wees dus voorzichtig en zorg dat je enkel de aansluiting en niet het contact of de kabel omhoog trekt.

Om de aansluiting weer aan te sluiten, positioneer je de aansluiting voorzichtig over het contact en druk je deze stevig naar beneden met het platte einde van je spudger.

Your contributions are licensed under the open source Creative Commons license.