Fix Your Stuff Community Store

Remplacement du ventilateur gauche du MacBook Pro 15" Retina mi-2012

Notice: You are editing a prerequisite guide. Any changes you make will affect all 37 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 2

Step 2
MacBook Pro 15" Retina Display Mid 2012 Left Fan Replacement: step 0, image 1 of 1

  • Remove the following three screws securing the left fan to the logic board:

  • One 4.4 mm T5 Torx screw with 2 mm collar

  • One 5.0 mm T5 Torx screw with 2 mm collar

  • One 3.9 mm T5 Wide Head Torx screw

  • When reinstalling the fan and its screws, don't fully torque the screws until you've first installed all of them loosely, so that the fan can move a little and position itself properly as you insert the screws into their threaded standoffs.

Dévissez les trois vis suivantes fixant le ventilateur gauche à la carte mère :

Une vis Torx T5 de 4,4 mm

Une vis Torx T5 de 5,0 mm avec un épaulement de 2 mm

Une vis Torx T5 de 3,9 mm à large tête

[* black] Remove the following three screws securing the left fan to the logic board:
- [* red] One 4.4 mm T5 Torx screw
- [* orange] One 5.0 mm T5 Torx screw with 2 mm collar.
+ [* red] One 4.4 mm T5 Torx screw with 2 mm collar
+ [* orange] One 5.0 mm T5 Torx screw with 2 mm collar
[* yellow] One 3.9 mm T5 Wide Head Torx screw
+[* icon_note] When reinstalling the fan and its screws, don't fully torque the screws until you've first installed all of them loosely, so that the fan can move a little and position itself properly as you insert the screws into their threaded standoffs.

Your contributions are licensed under the open source Creative Commons license.