Fix Your Stuff Community Store

Reemplazo de batería de New Nintendo 2DS XL

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 3

Step 3
New Nintendo 2DS XL Battery Replacement, Case Separation: step 0, image 1 of 2 New Nintendo 2DS XL Battery Replacement, Case Separation: step 0, image 2 of 2
Case Separation

  • Be careful when separating the bottom panel from the front casing to avoid breaking the three cables connected to the motherboard (two on each side and one in the rear).

  • Using a spudger, separate the back panel from the front casing by gently prying around the panel.

  • There are many clips along the hinge of the case, so it is recommended to work your way along one short side and the two long sides before finishing the last short side.

Separación de la carcasa

Ten cuidado cuando separes el panel inferior de la carcasa frontal para evitar romper los tres cables conectados a la tarjeta madre (dos en cada lado y uno en la parte trasera).

Usa una espátula, separa el panel trasero de la carcasa frontal haciendo palanca gentilmente alrededor del panel.

Hay algunos clips a lo largo de la articulación de la carcasa, así que es recomendado trabajar a lo largo de un lado corto y los dos lados largos antes de terminar el último lado corto.

Your contributions are licensed under the open source Creative Commons license.