Where do I find replacement Display Adhesive for the 13 Pro? The display adhesives sold here seem to only go up to XR, but not the 13 Pro.

Where do I find replacement Display Adhesive? The display adhesives sold on iFixit seem to only go up to XR, but not the 13 Pro.

Where's the internal battery located? The one that keeps the internal clock running when the battery's out? My camera resets it all if I take longer than a few seconds, and it's frustrating to have to set it back up again every other time.

I installed the dual drive correctly, it's recognized by the computer and everything's working. The only difference is that the audio now seems to be located more to the right of the computer than it used to. Is this due to the dual drive encloser being a little leaner than the optical drive, allowing sound waves to spread out more on the right? Is there anything I can do about this? The speakers are both working equally loudly, I checked for this in system settings; if I move the slider all the way to the left, the audio is as loud as when I move it all the way to the right, only that when the setting is set to left, the sound is coming out of the middle of the computer.

I got the same problem, did you ever find any source for replacement screws?

There is no reason for the lens to be removed before removing the battery - on the contrary, due to the sensor being completely exposed in mirrorless cameras, removing the lens lets dust particles and similar get into the case and onto the sensor easily which reduces the quality of pictures until it’s cleaned which is a pretty dangerous process.

Successfully exchanged the battery, seems to work without a problem!