Hey Did you pull out the cables between the outer casing and mother boards? More specifically the gold tipped smaller ones? This is normally the issue. If you dissemble the GoPro to the point where the mother board it free from the LCD board then you should be able to put this back in place and then put it all back together again (although it's a little tricky) if that's not fixed it then it could be a component part which needs to be replaced.

Hi Charles Yes you can repair it pretty easily. You need to almost completely desemble the camera tho. So make sure you have a good quality screw driver. What you want to do is make sure that you connect the gold cable and power to the motherboard before putting it all back together again. You might need a pretty good tweezer as well to help. Good luck. Geoff

Hi there I have the same idea. I have the Mac mini 2014 8gb 2.6ghz with the 1tb HDD. It is possible to add the PCIe . Do you want to run it as FUSION or duel drives? Fusion will require basic terminal knowledge which really is easy if that's what you want. Video link here http://youtu.be/w4NqbGEJpN4 I want to run duel drive tho. So in future I can take out the HDD and add a SSD if needed. Problem is I can't find a video to show how to migrate from HDD to PCIe. What you need to buy 1- You might find the flex cable from someone selling Mac mini parts on eBay. Otherwise looks for 076-00040 which is the HDD Carrier which comes with the flex cable and hole to fix the PCIe down. 2 - look for an apple Samsung PCIe for 2013 onwards MacBooks. Or part MZ-JPV5120 ( for the 512gb otherwise just replace the 512 with 128 or 256 for smaller SSD or you could hunt for the 1tb version) 3 - http://youtu.be/G3MmzNRIkJM this shows how to do the upgrade. It says fusion but it's duel and incomplete because he still runs the OS...