Thank you for the guide

Thank you to the previous commenter who said to skip step 8 thru 20. Step 8 can easily break parts to it is way better to avoid it, and it is not necessary to do when replacing the circle pad.

Almost all the screws are interchangeable, but make sure your screwdriver fits and press hard to avoid stripping them in step 1 and step 4

You can get a metal replacement circle pad here:

https://www.shapeways.com/product/76RHQ7...

Don't do this step! it is not necessary. you can skip steps 8 through 20

step 11, if you're just replacing the button, you don't need to disconnect the circle pad ribbon from the motherboard.

thank you monk333y, the author of this guide needs to correct a couple of things and how hard would it be for her to add steps 21 onward from the other guide?

I used a super tiny metal screwdriver to push the bumper against one side and then used the screwdriver to push it up and out