The left channel is not changing volume and is stuck at being very low, it is also quite fuzzy. I can only hear any sound...

Hello everyone, I recently got a second-hand Saitek X52 throttle and joystick. The throttle works fine and I can see all...

So I just replaced the t-con board in my KDL-50W829B Originally I had sound with no picture at all, replacing the t-con...

I can’t see if the solder pads on the board are damaged or not, from the look of the pins you should be fine. It won’t be a difficult job but always practise first if you aren’t sure of your abilities. Use a small amount of solder to help reflow the existing solder on the pins.

I followed the traces, seems that the issue is the potentiometer used to change volume, there’s a break in one of the slides.