This user hasn't filled out their profile yet.
Answers
Page 1 of 2
Guide Comments
Are you sure your watching the right instructions for the model you own? If 2 wires, and the right battery was bought, then it also should have 2 wires. IF 3 wires on the battery, perhaps the wrong model battery was ordered for your device. Watching a teardown video just now, this “ JBL Clip 2” has 3 wires. It is always a possibility that JBL used a version 1 and version 2 battery / motherboard in the JBL Clip 2’s.. you would be the one to determine that.
There should be sticky glue holding down wires and sealing up openings. Take care when you need to remove this glue.
When pulling out the connector, be careful of the small parts on the motherboard.
Careful of the O-Ring.
You might have to pick the hot glue out the screw heads.
Careful not to break the grill pins as they are sticky glued into place.