When I connect the steering wheel to the console on, the motor receives hardly any voltage and hardly any force, when it...

The microUSB connector of my my Polar A370 is broken. When I’ve contacted Polar Support asking about how to adquire as...

I've attached pictures of the location (see my finger) of SB3200 diode, 0 ohm in every direction. I replaced by a new RGP30D.

See this guide: https://www.schneordesign.com/diy/diy-irobot-roomba/chm-clean/ Due to if there’s a lot of debris inside the gears that brushes can’t turn, Rooma stops by Error 2, in your case the brush system may be disengaged, probably the smallest and weakest gear, the motor’s one, has worn teeth or enlarged bore and slips.