I’ve got problems with screws, when assembling back all parts together with HARDWARE which I repair/open/close FIRST TIME.

It’s why it is VERY GOOD, if not a BRILLIANT idea to indicate which screws are being removed in all particular steps, for example:

* instead of laconic (and maybe funny, but totally USELESS"): “After removing a few Torx screws “

* give us some details like: “After removing 3 M3x6 screws”

It would give us an idea which screws are taken from, and which goes to. Usually there are different screw types, even if the same thread - the length are different, so it would SAVE MUCH TIME for examinig, which screws are where, or even go back with assemblinbg back only because wrong screw types has been used.