This user hasn't filled out their profile yet.
Questions
Dropped my IPhone 11 on hard ground, only one crack went to screen. However after 2 days, the screen became partially...
Read moreI accidentally dropped a 1kg object onto the phone, both the front and back glass shattered; I thought welp, guess I’ll...
Read moreI was replacing my optical drive in my Mid 2011 27” iMac. I’ve done some repairs on similar models before. Whilst putting...
Read moreAnswers
CMD+OPTION+R CMD+P+R Try one of these, still no results? Buy a hard-disk and an external hard disk reader (You will lose your data!) -Jup :)
Read moreUse the original HDMI cable, switch HDMI input on TV, check on TV if your on correct input, Try a different TV. Still no results? -Jup :)
Read moreSome force should do the trick. -Jup :)
Read moreYep! Here: https://m.ninjakitchen.com/include/pdf/m...-bl770.pdf Hope it helps! -Jup :)
Read moreIMac 27” mid-2011 doesn’t have V-Sync cables. You must mean something else. -Jup :)
Read moreHeat Gun, about £30 on Amazon, or if your on a budget, a hairdryer on full will do the trick, but make sure the hairdryer is never touching the phone, keep it a few cm away from the phone in the upwards direction. -Jup :)
Read moreYou have damaged the LCD my friend. There is no way to repair this, you may have dropped your screwdriver or tool onto the unprotected LCD, as for a removal of LCD on this IMac you have to take down the magnetic glass shield. You should either buy a new LCD or live with it. If you do end up buying a new LCD,. I can tell you how to make a monitor/TV with the old LCD, although the line will still be there Sorry! -Jup :)
Read moreHi! I had this issue a while back, speaker batteries are rarely the problem, and with Charge 3’s its almost definitely the charging port. Here’s a link on how to fix the charging port: https://www.youtube.com/watch?v=g3si3m2K... Hope it works out! -Jup :)
Read moreHi! I’ve seen this issue a couple of times, If possible could you post pictures of the lines here so we can see Adding images to an existing question -Jup :)
Read more