Good guide but agree with keturn that it would be great to have more tips and reminders for replacing the screen.

I mostly figured it out, heres how I did it:

- I removed the old adhesive, and tried to scrape and clear it all.

- next I attached the new adhesive before connecting the screen cable since I figured it would be hard when its attached. I did try to make sure to press all along the adhesive with tweezers to set it. I left the next set of backing on to minimize the time the adhesive is exposed (avoid dust or me touching it)

- then I attached the connector. This was a little difficult, but also not very experienced with this.

- then I removed the adhesive backing and closed it up right after. I used rubber bands (3 across and 1 down the middle) to clamp the screen and put some books on it as much as I could over the next day.