This user hasn't filled out their profile yet.
Answers
obviously, a jam, if you can gain access to the tray try shaking it, putting a toothpick in and wiggling it, or putting a few drops of (liquid) hand sanitizer into it. try methods 1, 2, 3 then 2 again (in that order). hope this helps :)
Read moreprobably, a loose cable OR, I had a problem similar to this, my satellite cable goes over the roof, and the weather had weathered it and it wouldn't work. get a new cable or my grandparents had a similar cable to this as well, they just had a bad signal though, they had to get their satellite replaced as some water got into it. hope this helps :)
Read morecleaning the fan is probably your best bet, no clue apart from that. hope this helps :)
Read moreif you tried all of those things, it could be a case of a loose/broken pin of a cable. the sluggishness could be a case of... a... virus :(. hope this helps :)
Read moreYes probably a faulty power supply, you could probably buy one on amazon or something for a pretty good price. just make sure the voltage and wattage are the same as the old one. hope this helps :)
Read moreHmm. definitely not software related, hopefully, it could be a loose or disconnected cable on the inside. sadly, there's a possibility it's a motherboard issue. and €1000!?!?!?!? that's mad. you should rate the place badly for that. hope this helps :)
Read moreHonestly, no clue, sorry. probably a pretty general fix. not like a specific part. e.g. loose power cable on the inside. hope this helps :)
Read moreThis might be a very simple repair, use a sim ejector or even a tooth pick to try and clean the port. after that, if you have some liquid hand sanitizer, put a drop or two into the port. hope this helps :)
Read moreMy best guess would be to replace the battery. If you hear any sound or notifications, it's obviously the screen.
Read moreIf either of the ports don't work. It must be the battery, iFixit probably has a guide and kit to fix it, hope this helps! Or, try booting your mac into recovery mode, and reset or something?
Read moreCameron
@mrcameron
1
Reputation
10
Solutions
0
Guides
Member Since 11/27/22
Votes
2
0