This user hasn't filled out their profile yet.
My Wikis
Completed Guides
Questions
Hello friends, after a long time. From my job (mobile phone technician) I have returned after 15 years to my original...
Read moreHi all, I am looking for schematic and .brd files for MSI A11UEK laptop. I will be grateful for everything. Thanks
Read moreHallo, I searching like 15min in gallery app how to rotate photo 90° or 180° is really in flagship not exist this option?
Read moreHello, i have one question. I get laptop from my customer, laptop was complete waterdamage but important is data, is some...
Read moreHello, i have question, maybe is really stupid question but AC systems i dont understand too much and i have from high...
Read moreHello, i get Samsung galaxy fit (maybe samsung galaxy fit e) SM-R370. I need reset it to pair with my phone. Any idea? Thanks
Read moreHello, i working now on homepod, it looks like is common issue for this model, only blinking plus and minus button. I try...
Read moreHello, i get 2x 12V 95Ah AGM battery, is new (never used) but the voltage when i get them was only 8,3V. I think was long...
Read moreI get one 512GB board from iphone 13 pro, my question is when is the nand IC compatible with lower models actually 11 and...
Read moreHello, i have problem with one asus zenbook, i dont know now the exact model number but is i7 8gen with integrated HD...
Read morePage 1 of 2
Answers
this is probably a defect in the display itself. the only possible repair is to replace the display
Read moreThe plastic frame should be glued, try to heat the display housing little bit and remove the frame... when is oled display you can use also alcohol for make easier remove the glue Update (01/11/24): First remove the hinge part
Read moreYou can try open it, and try from inside with needle push out the rest from jack connector outside. Or you can replace the small board with jack connector. Actually you can replace only the jack socket when you have some soldering tools and skills. Or old school play with some Sharp tweezers and try to put out.
Read moreHello, from my experience without reading complete this discusion and anwserv what you get i can tel you 99% is power flex with the LED
Read moreHello, i have 15years experience with microsoldering, and i can tell you "swap" the cpu and nand is really the last option. When the motherboard have short is can be only 1 capaciotor or maximum power IC. Especially after drop is mostly capacitors fault. swap the cpu and memory chip is very risky compare with "only" power ic replace. Also the swap is very expensive. I recomend to you find first somebody who understand little bit deep in this problematic and not take serious first diagnostic from random phone shop. For example i have for this model schema and all stencil for reball, but iam from austria.
Read moreWhen is brand new i will give insta to warranty. Not need searching the problem when have warranty.
Read moreHello, its looks like hard disc or ssd have problem. the pc want actualy say, there is no operating system to run. Can be only wrong booting setting in bios, or operating system on disc is damaged or disc is KO. try go to bios first and see when is showing some drive.
Read moreHello, thats mean maximum load what the cable can handle. Teoreticaly can use this cable for devices up to 1500W. (6A*250V =1500W). PS4 need cca 250W. You can use this cable without stress.
Read moreHello, i dont understand the reason why you need this, i hope is for some legal reason. Iphone XS have 2 speakers, one down near of charging port, one is ear speaker what can also working as loundspeaker. You can easily remove the big speaker, its need remove few screws, and the small ear speaker is soldered on sensor flex, when you dont need the sensor (light, proximity, iluminat, mic, and speaker 😄) you can disconect complete the flex. Ist the long one what going from lcd. Or you can desolder only the speaker. After will be the phone 🤐
Read moreHello, i was having the same issue with samsung fit band or what was it. Very old device also not with wireless charging but with goldplated pins. After when the gold was scratched out come oxidacion and same problém. I was solving this with my juwelery shop, he was make goldplating those pins, (or solder there some slim gold plate, iam not sure anymore) and was solved.
Read morePage 1 of 7
VojTech
@vojtech59738
1,168
Reputation
65
Solutions
0
Guides
Member Since 06/14/23
Votes
10
2