Disconnected the front camera assembly and it worked for me. Cool. Thanks man. I was tripping that I had a baseband problem I don’t feel like f-ing with.

So on my window I went on eBay and found the window relay switch on the drivers side that is the master and now my window goes both up and down. It was not the regulator or motor. I put 12V on in both directions and it worked.

I found a solution by scraping down to the traces and soldering them thick solder. Worked for me : )

Mine were L2200 & L2210 : ) Main cause is the price of rice in China these days. You guys can send me stuff, I'll fix it. Update (04/13/2016): Yes. You fix it by replacing the backlight filter. Send it to me. I'll do it. Sounds like you are lacking the 4k in equipment & knowledge. It's not something you'll get right without a few years of training 1st.

iPhone 5C headset with static noise. Tried different headsets, still static. Tried brand new port, still static.

Got same thing (I think) apple logo to black screen. Not boot looping. Not restoring.

It was an iPhone 5 I believe. I just noticed the marks on the schematic. I don't know anything about polarized capacitors yet, still in my learning stage. So that may have been part of the problem LOL. But now I thank you, because I will learn go learn about it. It was awhile ago and that phone has been since returned. But have many other issues (Mac/iPad) that I am working on and this (learning) applies to all of that as well. Ohhh, is that why they looked like diodes? They are polarized capacitors? They are!!! Didn't know they came like that LOL : ) That mystery is solved. #1 dunce : ) but now I know : ) Thanx! But yes, I figured they were mislabeled diodes and a little familiar with the orientation of diodes and the markings on schematics to match. So yes I matched them up with the line closest to the red bracket icon. Replaced all 4 & figured if all replaced the problem would be solved, LOL. But Grasshopper still has lot to learn : )

Check C6505. Worked for me.

Where is the U2 chip? And I am getting the same running scrip down the screen with only a fresh screen plugged in, no camera. I did change a bunch of caps that a customer knocked off in self-repair attempt. Got them all on and getting this error. Don't think the chips had polarity. Double checked. No polarity on the ones I changed. Checked continuity and everything checked out.