Editing Canon PowerShot A620 Troubleshooting

[title|Canon PowerShot A620 Troubleshooting] == Device Won't Turn On == === Check the Battery === Check that the batteries are not dead. Replace batteries with four new AA alkaline batteries. Check if batteries are placed in the right direction. Rechargeable batteries may also be used and Canon AA-size NiMH batteries are recommended. === Check Battery Cover === Make sure the battery cover is tightly closed. Also, inspect the battery housing for any corrosion or bent components. === CMOS Battery === There is an internal battery that may be check or replaced on the motherboard. Refer to the Camera Housing iFixit Guide for location. == Black Screen on Power Up == === Low Battery === Check that the batteries are not dead. Replace batteries with four new AA alkaline batteries. Check if batteries are placed in the right direction. Rechargeable batteries may also be used and Canon AA-size NiMH batteries are recommended. == Dim Screen == === Environment === The LCD monitor image will darken in strong sunlight or bright light according to the manufactured settings and indicates normal operation under these conditions. == No Flash == === Check Battery === Check that the batteries are not dead. Replace batteries with four new AA alkaline batteries. Check that batteries are placed in the right direction. Rechargeable batteries may also be used and Canon AA-size NiMH batteries are recommended. === Check Camera Settings === Press the function set button and scroll down to the flash output menu. Once there, press the function set button again to turn on the flash. === Replace Bulb === The flash bulb may burn out if used often. When this occurs the bulb must be replaced. == No Sound == ''Warning sounds still play, but start-up, operation, self-timer, and shutter sounds are mute.'' === Check Camera Settings === Open the menu by pressing the bottom button labeled menu. Press the right directional button to move to the setup menu. Press down to scroll to the mute option and check if it is enabled. If it is, highlight the mute setting and press the function set button to toggle off mute.