Editing Crayola Crayon Maker Troubleshooting

[flag|student wiki] [title|Crayola Crayon Maker Troubleshooting] [summary]Answers questions to common problems with the Crayola Crayon Maker, including how to replace the light bulb, how to fix a lid that will not lock into place, and how to clean the device.[/summary] [summary_image|447982] == Crayons will not melt == ''You have done everything right and crayons still will not melt.'' === Device is not plugged in === Before going further, check to see if device is plugged in. If so, continue below. === Device is not turned on === Check to see if device is turned in the ‘on’ position. If so, continue below. === Lightbulb is burned out === Check to see if light bulb is burned out. Click here to check light bulb and replace if necessary. == Lid will not lock == ''You close the lid, but it does not lock into place while crayons are melting.'' === White plastic arm inside control box is broken or out of place === To see if this is the cause, click here. If white plastic arm is in fine working order, continue reading below. === Clear plastic sliding lock mechanism on underside of gray portion of the device (next to the metal vent) is out of place or broken === To see if sliding lock mechanism is not functioning properly, click here. === Metal melting tray will not flip up === Check green plastic lifting arm to see if it is working properly. If working properly, continue reading. === Green plastic lifting arm is sticking === Click here to find information regarding cleaning and general maintenance for this device.