Revision to Dyson DC 14 Troubleshooting
| === Internal housing routes need cleaning === | |
| - | To clean the internal housing routes |
| + | To clean the internal housing routes follow [http://www.ifixit.com/Guide/%28Maintenance%29+Clean+the+internal+channels/11494/1|this guide]. |
| == Screeching noise during operation == | |
| === Broken brush head === | |
| - | To replace the brush |
| + | To replace the brush follow [http://www.ifixit.com/Guide/Installing+the+Dyson+DC14+Brush+Bar/11270/1|this guide]. |
| === Vacuum motor malfunction === | |
| - | To replace the motor |
| + | To replace the motor follow [http://www.ifixit.com/Guide/Replacing+the+Dyson+DC14+Motor/11532/1|this guide]. |
| == Filter needs cleaning == | |
| === Routine filter cleaning === | |
| - | Remove the canister from the vacuum. Open the top compartment and remove the filter assembly. Under cold water, clean the blue sponge-like filter and the yellow filter holder. Set both aside to dry overnight. Do not use your vacuum without the filters installed. After the filters have dried, re-install them. Your vacuum is now safe to use. |
| - | |
| - | === Cyclone Assembly needs cleaning === |
| - | |
| - | Follow this guide to clean the chambers of the cyclone assembly. |
| + | To clean your filter, follow [http://www.ifixit.com/Guide/%28Maintenance%29+Clean+the+filter/11484/1|this guide]. |
| == Vacuum will not turn on == | |
| === The power switch is malfunctioning === | |
| - | To replace the power switch |
| + | To replace the power switch follow [http://www.ifixit.com/Guide/Installing+the+Dyson+DC14+Power+Switch/11487/1|this guide]. |
| - | === The power cord |
| + | === The power cord need maintenance === |
| - | To replace the power cord |
| + | To replace the power cord follow [http://www.ifixit.com/Guide/Installing+Dyson+DC14+Power+Cord/11500/1|this guide]. |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.