Revision to NETGEAR WGT624 v3 Troubleshooting
| == NETGEAR router won't turn on == | |
| - | NEATGEAR has no power. |
| + | "NEATGEAR has no power." |
| === No Power Connection === | |
| "My internet is really slow" | |
| - | === |
| + | === Interference === |
| - | The power light should be solid green, and reset the router. |
| + | Other electronic devices such as microwaves and phones may be working over the same frequency. Try keeping them further away from the router in order to decrease interference. |
| + | |
| + | === Incorrectly inserted cables === |
| + | |
| + | A weak signal could be caused if the input/output cables are incorrectly inserted. The ethernet cord should be plugged into the back of the router and any outgoing cables should be plugged into the black output slots. Make sure all cables are completely plugged in. |
| + | |
| + | === Update Firmware === |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.