Revision to NETGEAR WGT624 v3 Troubleshooting
| If the router still won't turn on and you are sure it is plugged in correctly try to restart it. Unplug the router for 30 seconds and then plug it back in. | |
| + | |
| + | == Router has a weak signal == |
| + | |
| + | "My internet is really slow" |
| + | |
| + | === Interference === |
| + | |
| + | Other electronic devices such as microwaves and phones may be working over the same frequency. Try keeping them further away from the router in order to decrease interference. |
| + | |
| + | === Incorrectly inserted cables === |
| + | |
| + | A weak signal could be caused if the input/output cables are incorrectly inserted. The ethernet cord should be plugged into the back of the router and any outgoing cables should be plugged into the black output slots. Make sure all cables are completely plugged in. |
| + | |
| + | === Update Firmware === |
| + | |
| + | Updating the firmware can fix software glitches. Download the latest version of firmware and then reset the router. |
| == LEDs never turn off == |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.